UTM Accessories
Extensometer :
This instrument is to be used on Tensile or Universal Testing Machines to find out values of “PROOF STRESS”, “YOUNG MODULUS” & “Materials strain related properties”
Mech Extensometer :
| Model | FXT-3 |
| Measuring range | 3mm |
| Resolution | 0.01 mm |
| Gauge lengths | 30 to 120mm adjustable |
Electronics Extensometer :
| Model | T EE (Clip on type) |
| The measuring range | 3mm |
| Resolution | 0.001 mm. |
| Standard two fixed gauge lengths of 25 & 50 mm | |
| The measurement accuracy satisfies all requirements of “Class -1 as per IS 12872-1990 | |
Long travel extensometer :
| Gauge length | 600 mm max |
| Resolution | 0.01 mm |
HOT Chamber :
Hot Chamber assembly with UTM is supplied as an extra accessory to check tensile strength related parameters of the samples at hot condition.
Technical Specification :
1
Temperature Range
300° to 1200° C
2
Max Gauge length of sample in hot Chamber
100 mm
3
Main Supply
230V, AC, 50 Hz, 16 amp
4
Max. Current
30 amp
5
Sample holding dia for small samples
M20, M12
| 1 | Temperature Range | 300° to 1200° C |
| 2 | Max Gauge length of sample in hot Chamber | 100 mm |
| 3 | Main Supply | 230V, AC, 50 Hz, 16 amp |
| 4 | Max. Current | 30 amp |
| 5 | Sample holding dia for small samples | M20, M12 |
Small double shear /Big Double Shear :
- Small double shear test with 5 sets of bushes for shear test of Dia 5, 8, 12, 16 & 20 mm.
- Big double shear test with 5 sets of bushes for shear test of Dia 25, 30, 35 & 40 mm.
Tensile test attachment for shouldered and threaded specimen :
- Bare Attachment
- 1 Set of 8 split bushes with springs for Dia 6, 8, 10, 12, 14, 16, 18 & 20 mm shouldered specimen (size in mm)
- 1 Set of 6 threaded bushes for M 6, M 8, M 12, M 14, M 18 & M 20 threaded specimen
180°Bend test attachment :
- Dia of bending support rollers – 30 mm
- Width of bending support rollers – 60 mm
- Max. distance between bending supports – 175 mm
- Min. distance between bending supports – 15 mm
- Dia of bending pane pin – 30 mm
- The attachment meets the requirement of IS-1599-1976 & IS 692-1974
Bend Rebend :
Bend Re-bend test attachment as per BS 4449 - 1997 for Bar upto 40 mm dia bending tools of dia 16, 20,24, 32, 40, 50, 60, 64, 80, 140, 175, 240, 280 & 320 mm
Nut Bolt Testing Fixture :
Nut Bolt Testing Fixture as per IS 1367 Part 3 & 6 suitable for testing of Nuts & bolts from size M 6 to M 33
Wire Rope :
Wire rope tensile test attachment for wire rope upto 10 mm dia.
Grips for Strand wire :
Special Jaw Set & Inserts for Strand Wire suitable for Dia 6.35mm, dia 7.95mm, dia 9.5mm, dia 11.1mm, dia 12.7mm , dia 15.2mm
