Rockwell Hardness Testing Machine Model TRSN - T

 

* click on Image for larger View
 
TRSN Series - Rockwell, Rockwell cum Brinell, Rockwell cum Superficial Hardness Testers are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These models are having superior design to that of existing conventional Rockwell Hardness Testers & easy to operate still quite sensitive & accurate.
 
Salient Features:
 
FTM make Hardness Testers model TRSN, TRSN-B and TRSN-T are manually operated.
Machine is having different Taper front look & equipped with Big dial gauge and superior aesthetic look over conventional Rockwell Hardness Tester.
The machine is powder quoted & paint shade does not fade over the years of use.
Most of the important parts are plated to avoid rusting.
An antifriction linear bearing is fixed in Hardened & ground stepped bush which will provide perfect vertical movement of diamond holder. Thus the testing of small pin or ball upto 3mm dia is possible.
All models conform to -
Results are displayed in BIG Font size
IS : 3804 BS 10109-2 & ASTM-E-18 for Rockwell Test.

IS : 5073 BS 10198-2 & ASTM - E-18 for Rockwell Superficial Test

IS : 2281 BS 10003-2 & ASTM - E-10 for Brinell Test.
Automatic Load Selection for all models.
Motorized version of all models is also available.
 
Technical Specifications :
 

Model

TRSN

TRSN-B

TRSN-T
1. Test Loads (Kgf)
60, 100, 150 (Rockwell)
60, 100, 150 (Rockwell)
187.5, 250 (Brinell)
60,100,150 (Rockwell) 15, 30, 45 (Rockwell Superficial)
2. Initial Loads(Kgf)
10
10
10 (Rockwell) and 3 (Rockwell Superficial)
3. Max. Test Height (mm)
222
222
222
4. Depth of Throat (mm)
130
130
130
5. Size of Base (mm) (Approx.)
450 x 265
450 x 265
450 x 265
6. Machine Height (mm)
627
627
627
7. Net Weight (Approx.) kg.
65 Kg.
70 Kg.
70 Kg.
 
Standard Accessorie :
 
Model
TRSN
TRSN-B
TRSN-T
1. Rockwell Diamond Indenter
1 No.
1 No.
1 No.
2. Superficial Diamond Indenter
-
-
1 No.
3. Testing Table Ø 50mm
1 No.
1 No.
1 No.
4. Testing Table Ø 40 mm with ‘V’ Groove for round Jobs Ø 6 to 45 mm
1 No.
1 No.
1 No.
5. Steel Ball Indenter Ø 1/16”
1 No.
1 No.
1 No.
6. Steel Ball Indenter Ø 2.5 mm
-
1 No.
-
7. Steel Ball Indenter Ø 5 MM
-
1 No.
-
8. Test Block HRC
1 No.
1 No.
1 No.
9. Test Block HRB
1 No.
1 No.
1 No.
10. Test Block HB 2.5 mm/187.5 Kgf
-
1 No.
-
11. Test Block Rockwell Superficial 30N
-
-
1 No.
12. Steel Ball Ø 1/16”
5 Nos.
5 Nos.
5 Nos.
13. Allen Spanners
3 Nos.
3 Nos.
3 Nos.
14. Clamping Device
1 No.
1 No.
1 No.
15. Brinell Microscope
-
1 No.
-
16. Telescopic Sleeves for elevation screw
1 Set
1 Set
1 Set
17. Instruction manual
1 Book
1 Book
1 Book
 

FTM Reserves the rights of change in the above specification due to constant improvements in design.