Automatic Computerized Brinell Hardness Testing Machine Model:A 3000 PC.
|
* click on Image for larger View
|
 |
Design of machine is similar to OPFB-A, However with Computerised measurement of Brinell impression. Machine Confirm to IS 2281/2005, BS : 240 & ASTM E-10.
 |
Automatic spindle up & down. |
|
Dwell time setting. |
|
Measuring range up to 6 mm diameter. |
|
Fully computerized system for indentation measurement & display. Accurate measurement of Brinell Hardness through matched Optics, CCD Camera, hardware and software using advanced image processing technology. |
|
Windows based software system with well managed database. Windowing facility provided for measurements of bad images due to poor surface finish and other reasons. |
|
Operating modes: 1) Automatic mode 2) Measuring mode 3) Manual mode. |
|
Mean Diameter |
|
Brinell Hardness Value |
|
Bitmap image |
|
Low/High Limits of acceptance and accept or reject status. |
 |
Standard Accessories |
Model |
OPFB 3000 A |
A - 3000 PC |
Testing Table dia 200 m |
1 No. |
1 No. |
Testing Table dia 70 mm with "V" Groove for round jobs dia 10 to 80 mm |
1 No. |
1 No. |
Ball Holder dia 10 mm with T.C. Ball |
1 No. |
1 No. |
Test Block HB - 5/ 750 |
1 No. |
1 No. |
Test Block - 10 / 3000 |
1 No. |
1 No. |
Allen Spanner |
9 Pcs. |
9 Pcs. |
Instruction Manual |
1 Book |
1 Book |
|
Technical Data |
| Model | OPFB - 3000 A | A - 3000 PC |
Loads - kgf |
250, 500, to 3000 in stages of 250 |
250, 500, to 3000 in stages of 250 |
Max. test height X Throat (mm) |
380 x 200 |
380 x 200 |
Depth of Elevating Screw below Base (mm)(Appx) |
180 |
180 |
Machine Height (mm)(Appx) |
1225 |
225 |
Size of Base (mm)(Appx) |
380X 740 |
380X 740 |
Nett weight - kg (Appx) |
425 |
425 |
Drive Motor - HP |
0.33 |
0.33 |
Mains Suppy |
415V, 50 Hz, 3 Ph AC |
415V, 50 Hz, 3 Ph AC |
Gear Motor HP |
0.5 |
0.5 |
Indentation Measurement |
Direct reading optical device with 14 X Magnification |
With Windows based software & with CCD Camera |
Both OPFB - 3000A and A3000 PC Machines are also available with aditional load of 187.5 kgf and additional ball holder of Ø 2.5 Ball.
FTM Reserves the right to change the specification without prior notic due to constant improvemnts is design.