Products 
  
 
 
 

Automatic Computerized Brinell Hardness Testing Machine
Model:A 3000 PC.
 
 

* click on Image for larger View
 
Design of machine is similar to OPFB-A, However with Computerised measurement of Brinell impression. Machine Confirm to IS 2281/2005, BS : 240 & ASTM E-10.
 
Features
 
Automatic spindle up & down.
Dwell time setting.
Measuring range up to 6 mm diameter.
Fully computerized system for indentation measurement & display. Accurate measurement of Brinell Hardness through
matched Optics, CCD Camera, hardware and software using advanced image processing technology.
Windows based software system with well managed database. Windowing facility provided for measurements of bad
images due to poor surface finish and other reasons.
Operating modes: 1) Automatic mode 2) Measuring mode 3) Manual mode.
 
The test report consists of Machine Sample and test details along with
Mean Diameter
Brinell Hardness Value
Bitmap image
Low/High Limits of acceptance and accept or reject status.
 
Standard Accessories
 
Model
OPFB 3000 A
A - 3000 PC
Testing Table dia 200 m
1 No.
1 No.
Testing Table dia 70 mm with "V" Groove for round jobs dia 10 to 80 mm
1 No.
1 No.
Ball Holder dia 10 mm with T.C. Ball
1 No.
1 No.
Test Block HB - 5/ 750
1 No.
1 No.
Test Block - 10 / 3000
1 No.
1 No.
Allen Spanner
9 Pcs.
9 Pcs.
Instruction Manual
1 Book
1 Book
 
Technical Data
 
Model OPFB - 3000 A A - 3000 PC
Loads - kgf
250, 500, to 3000 in stages of 250
250, 500, to 3000 in stages of 250
Max. test height X Throat (mm)
380 x 200
380 x 200
Depth of Elevating Screw below Base (mm)(Appx)
180
180
Machine Height (mm)(Appx)
1225
225
Size of Base (mm)(Appx)
380X 740
380X 740
Nett weight - kg (Appx)
425
425
Drive Motor - HP
0.33
0.33
Mains Suppy
415V, 50 Hz, 3 Ph AC
415V, 50 Hz, 3 Ph AC
Gear Motor HP
0.5
0.5
Indentation Measurement
Direct reading optical device with 14 X Magnification
With Windows based software & with CCD Camera
 
Both OPFB - 3000A and A3000 PC Machines are also available with aditional load of 187.5 kgf and additional ball holder of Ø 2.5 Ball.
 
We also offer range of testing machines
FTM Reserves the right to change the specification without prior notic due to constant improvemnts is design.
 
 
 
Best View on 1024X768
Home Contact Us Sitemap